HDSP 9652 is the long-awaited successor of the well-known PCI card Project Hammerfall (DIGI9652). Like the original Hammerfall, HDSP 9652 offers 3 x ADAT optical I/O, ADAT-Sync In, SPDIF I/O and word clock I/O. On top, there are 2 MIDI I/Os and TotalMix, a DSP-based real-time mixer/router. The HDSP 9652’s Secure BIOS Technology allows to perform hardware updates via software/driver without any risk. And thanks to its unique ’Zero CPU Load’ technology Hammerfall DSP guarantees highest performance and lowest latency on both notebooks and desktops! Hammerfall also allows to connect Analog Expansion Boards (AEB). Two internal ADAT inputs and two internal ADAT outputs allow you to realize up to 16 analog inputs and 16 analog outputs directly inside the computer.
3 x ADAT digital I/O, based on RME’s reliable Bitclock PLL
1 x SPDIF digital I/O, based on RME’s reliable DIGI96 technology
1 x Breakout cable for coaxial SPDIF operation
1 x Word clock I/O (BNC) on included expansion board
1 x ADAT Sync In (9-pin D-type) for sample accurate transfers
2 x MIDI I/O, 32 channels high-speed MIDI via breakout cable
HDSP Meter Bridge: freely scalable level meters, peak- and RMS calculation directly in hardware
TotalMix: 1456 channel mixer with 40 bit internal resolution
S/MUX poured in hardware: 12 channels 96 kHz/24 bit for record and playback on ADAT optical
...and numerous other features found already in the Hammerfall series. And all this for an unbeatable price! The Hammerfall® DSP System comes with drivers for Windows 98/ME (MME with multi-client operation, ASIO 2.0, GSIF), Windows 2000/XP (full multi-client operation of MME, GSIF and ASIO 2.0) and MacOS (ASIO 2.0).
Supported sample rates: 32 kHz, 44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz, variable 8 buffer sizes/latencies available: 1.5 ms, 3 ms, 6 ms, 12 ms, 23 ms, 46 ms, 93 ms, 186 ms ASIO zero CPU load technology: 0 (zero!)% CPU load when using ALL 52 channels! All settings changeable in realtime Clock modes slave and master Automatic and intelligent master/slave clock control Enhanced Mixed mode: All inputs and outputs simultaneously operational Unsurpassed Bitclock PLL (audio synchronization) in ADAT® mode Enhanced Zero Latency Monitoring for latency-free submixes and perfect ASIO Direct Monitoring Comes with DIGICheck: the ultimate measurement, analysis and test tool Input 3 x optical (TOSLINK), 1 x coaxial (Cinch), 2 x MIDI, word clock (BNC) Input format SPDIF, AES/EBU (Consumer, Professional), ADAT® optical Output 3 x optical (TOSLINK), coaxial (Cinch), 2 x MIDI, word clock (BNC) Format output SPDIF, AES/EBU (Consumer/Professional), ADAT® optical
UNIQUE TECHNOLOGIES IN HDSP9652
AutoSync: Intelligent clock control according to operational mode and present/desired sample rate. Intelligent clock control according to operational mode and present/desired sample rate.
Bitclock PLL The most reliable receiver circuit for ADAT optical signal.
Dynamic Bus Utilization Scalable computer load according to the current usage.
Enhanced ZLM® Monitoring of the input signal, independent from clock mode and sample rate.
DIGICheck DSP Professional status and level display at lowest CPU load.
Intelligent Clock Control Measurement and display of all incoming and used clocks.
Latency Fast Change Change latency on-the-fly under ASIO, without manual reset or re-boot.
Secure BIOS Technology Automatic BIOS replacement when flash process fails.
SyncAlign® Surveillance and sample accurate synchronization of all channels.
SyncCheck® Comparison and display of all input clock status.
TotalMix Mixes all inputs and all outputs on all outputs. Several independent submixes possible.
Zero Latency Monitoring (ZLM®): Automatic monitoring of the input signal with zero latency.
RME Audio HDSP 9652
Have a question about the RME Audio HDSP 9652?
Call us toll free at 1-800-878-8882.