SPRING INTO ACTION AND SAVE 15% NOW!
Site Map  |  Contact  |  My Account  |  Home 1-800-878-8882 Mon-Fri 9:30AM - 6:00PM, Sat 10AM - 5PM Shipping  |  Policies  |  Security
view cartView Cart  |  Items: 0  |  Subtotal: $0.00  |  Check Out

Departments

Accept Credit Cards Online

Fender Amp Center

Furman CN-1800S SmartSequencer

15 Amp Bidirectional Power Conditioner Sequencer

Product Code: 68251

We're sorry, this product is no longer available.

Description
Designed for Commercial A/V Installers, the CN-1800S combines robust control capabilities via SmartSequencing™ Technology, advanced AC protection, AC noise filtration, and optional compatibility with the BlueBOLT® Remote Power and Energy Management Platform (BB-RS232 adapter required, sold separately).

The new CN-1800S is one of the first products to feature Furman's SmartSequencing™ technology, which allows large and complex A/V systems to be safely powered on and off with a simple press of a button or turn of a key, even by nontechnical personnel. SmartSequencing's bidirectional communications between installed units enables a primary unit to control and sequence multiple secondary units, ensuring multizone electronic systems are powered on and off safely and dependably from a single control point across an entire installation. Units can be connected via current loop at runs of more than 1,000 feet with backwards compatibility with Furman's legacy sequencers.

In addition, the CN-1800S offers robust control options, equipped with RS-232 ports and command sets for integration with control systems. An optional RS-232-to-Ethernet adaptor (sold separately) adds full IP-addressability to the unit, allowing it to be controlled, programmed, and monitored from a smartphone, tablet, PC, or any Web-enabled device via Telnet, direct HTTP connection, or Panamax/Furman's BlueBOLT®-hosted remote power and energy management platform.
In Depth
  • AC Voltage Input Range: 90-139VAC, 50/60Hz
  • Maximum AC Current Rating: 15 amps (Thermal breaker)
  • AC Cord: 3/14AWG, 10 feet, black, fixed, NEMA 5-15P plug
  • AC Receptacles: Rear Panel Outlets: 2 Unswitched NEMA 5 15R's (1 duplex), 6 Sequenced NEMA 5-15R's (3 duplexes each controlled by separate relay)
  • Front Panel: One NEMA 5-15R Convenience Outlet, Unswitched
  • Surge/Under-Overvoltage Protection: AC Surge Protection: SMP
  • Spike Protection Mode: Line to neutral, zero ground leakage
  • Spike Clamping Voltage: 188VAC peak @ 6,000 volts/3,000 amps
  • Response Time: 1 nanosecond
  • Maximum Surge Current: 6,500 Amps
  • AC Undervoltage Protection: EVS, 77VAC+/-3VAC
  • AC Overvoltage Protection: EVS, 145VAC+/-5VAC
  • AC Overvoltage Reset Modes: Manual and Auto-reset (configurable)
  • AC Filtering: LiFT
  • Noise Attenuation: Linear, 10dB @10KHz, 40dB@100KHz, 50dB@500KHz
  • Operating Temperature Range: 5C (40F) to 40C (105F) degrees
  • Humidity Range: <90% rH (Relative Humidity)
  • User Interface: Key-switch: Front panel, 3-position key-switch (On, Off, Remote)
  • Keys: Included, 1 pair
  • Push-button Switch: Front panel, hidden by security cover
  • Circuit Breaker: Front panel, push-button, 15A Thermal Breaker
  • Front panel diagnostic indicators: Primary link, Secondary link, Ethernet, Remote off, Delay 1, Delay 2, Delay 3, Power, Protection OK, Extreme Voltage
  • Front Panel DIP Switches: Front panel. Hidden by security cover, 1 Minute Delay, 2 Minute Delay, 4 Minute Delay, Force Off NO/NC, 12V Mode On/Off BND Mode On, Momentary/Maintained, Primary/Secondary, EVS Reset Auto/Manual
  • Potentiometer: Front panel, hidden by security cover, fine tune delay adjust
  • Control/Status/Triggering (Rear Panel):
  • Remote Terminal: +5-30VDC In, 12VDC (12mA) Out
  • SmartSequencing: Phoenix 4-Pin Connector, Screw Terminals, Primary & Secondary Links (Current Loop - 1000' nominal)
  • Remote Terminal: Phoenix 4-Pin Connector With Screw Terminals; +12V, STAT, REM, GND (Class 2 Wiring)
  • Force Off/Delay 3 Terminal: Phoenix 5-Pin Connector With Screw Terminals, FORCE OFF, DELAY 3 (Class 2 Wiring)
  • RS-232 Compatible: Yes, DB-9 Connector
  • IP Addressability: Optional, via BB-RS232 Ethernet/RS-232 Adapter (sold separately) for IP control via Telnet, HTTP, BlueBOLT®
  • Voltmeter: Available with RS-232/Ethernet option, ± 2VAC accuracy
  • Ammeter: Available with RS-232/Ethernet option, ±1A accuracy
  • Power Consumption (No Load): 10 Watts
  • Safety Agency: NRTL-C, RoHS Compliant

Item Number: Furman CN-1800S SmartSequencer [CN-1800S]    68251 1-1
View all Furman products
View all Furman products


Furman CN-1800S SmartSequencer [CN-1800S]

Furman CN-1800S SmartSequencer&nbspLarge View Furman CN-1800S SmartSequencer&nbspFront View 2 Furman CN-1800S SmartSequencer&nbspRear View Furman CN-1800S SmartSequencer&nbspAngled View


Check Out These Products
Road Ready RR4UED
Road Ready RR4UED $199.99 Buy
Deluxe 4 Space Rack Case
Whirlwind QBOX
Whirlwind QBOX $189.00 Buy
All-in-one audio line tester talk back and more..
Shure Beta 58A
Shure Beta 58A $159.00 Buy
Supercardioid Vocal Microphone
Shure SM58
Shure SM58 $99.00 Buy
Classic Cardioid Dynamic Microphone
Superlux Pink Stick
Superlux Pink Stick $49.95 Buy
Phantom Powered Test Signal Generator
Ultimate Support JamStand JS-MCTB200
Ultimate Support JamStand JS-MCTB200 $32.99 Buy
Tripod Base Microphone Stand with Telescoping Boom (Black)
Raxxess Cable Depot CBLD
Raxxess Cable Depot CBLD $14.95 Buy
Cable Hanger holds 30 Cables
Yamaha™ Authorized
Online Store


Roland™ Authorized
Online Store
Lower Price Hotline

Seen a lower price?
1-800-878-8882

You can also order by phone

Customer Service
1-888-884-9994

Order by Phone
1-800-878-8882

© Copyright 1996-2014 Eighth Street Music Inc. All Rights Reserved. Prices and availability of products are subject to change without notice. Product descriptions, pictures, are provided with intent of accuracy; however, 8th Street is not liable for errors, omissions, or misrepresentations. Please call 1-800-878-8882 with any questions. Privacy Policy.

Contact  |  E-mail  |  My Account Shipping  |  Order Tracking