The Basslite CH2010 10" Bass Speaker delivers the tone you want. Recommended for bass guitar. Ideal in vented 1x10", 2x10", and 4 x10" enclosures.
In Depth
Lighter weight
Neodymium magnet
Ideal in vented 1x10", 2x10", and 4 x10" enclosures
Specification
Nominal Basket Diameter: 10", 254mm
Nominal Impedance*: 8 ohms
Power Rating**: 150W
Resonance: 58Hz
Usable Frequency Range: 54Hz-3kHz
Sensitivity***: 96.7
Magnet Weight: 4 oz.
Gap Height: 0.28", 7.2mm
Voice Coil Diameter: 2", 50.8mm
Thiele & Small Parameters
Resonant Frequency (fs): 58Hz
DC Resistance (Re): 5.37
Coil Inductance (Le): 0.52mH
Mechanical Q (Qms): 6.5
Electromagnetic Q (Qes): 0.47
Total Q (Qts): 0.44
Compliance Equivalent Volume (Vas): 43 liters / 1.5 cu. ft.
Peak Diaphragm Displacement Volume (Vd): 120cc
Mechanical Compliance of Suspension (Cms): 0.26mm/N
BL Product (BL): 11.1 T-M
Diaphragm Mass inc. Airload (Mms): 30 grams
Efficiency Bandwidth Product (EBP): 123
Maximum Linear Excursion (Xmax): 3.5mm
Surface Area of Cone (Sd): 344.9 cm2
Maximum Mechanical Limit (Xlim) : 7.5mm
Recommended Enclosure Volume
Vented: 17-51 liters/ 0.6-1.8 cu.ft.
Overall Diameter: 10.25", 260.4mm
Baffle Hole Diameter: 9.13", 231.9mm
Front Sealing Gasket: fitted as standard
Rear Sealing Gasket: fitted as standard
Mounting Holes Diameter: 0.28", 7.0mm
Mounting Holes B.C.D.: 9.73", 247.1mm
Depth: 4.75", 121mm
Net Weight: 3.6 lbs., 1.6 kg
Shipping Weight: 4.7 lbs., 2.1 kg
Materials of Construction
Copper voice coil
Polyimide former
Neodymium magnet
Non-vented core
Die-cast aluminum basket
Hemp Cone
Cloth cone edge
Zurette dust cap
*Please inquire about alternative impedances.
**Multiple units exceed published rating evaluated under EIA 426A noise source and test standard while in a free-air, non-temperature controlled environment.
***The average output across the usable frequency range when applying 1W/1M into the nominal impedance. Ie: 2.83V/8ohms, 4V/16ohms.
Eminence response curves are measured under the following conditions: All speakers are tested at 1w/1m using a variety of test set-ups for the appropriate impedance | LMS using 0.25" supplied microphone (software calibrated) mounted 1m from wall/baffle | 2ft. X 2ft. baffle is built into the wall with the speaker mounted flush against a steel ring for minimum diffraction | Hafler P1500 Trans-Nova amplifier | 2700 cu.ft. chamber with fiberglass on all six surfaces (three with custom-made wedges)
View
Cart
Seen a Lower Price?
