Audio Technica M3 Dual Band Wireless In-Ear Monitor System

Pro Wireless In-Ear Monitor System

Product Code: 43727

Retail Price: $1,099.00

SALE PRICE!

$799.00

BUY TODAY AND SAVE $300.00 (27% from Retail)

Ships free on most orders over $149.95
Click for Details

Click Here for Shipping Options

8thstreet Reward$

Seen a Lower Price?
Call 1-800-878-8882
or Click Here to let us know now!

Description

Audio-Technica's advanced M3 IEM system offers a full range of professional in-ear monitoring features, with a choice of 1321 UHF channels and easy-to-read LCD information displays on both transmitter and receiver for setting preferences. The stereo monitor system is equipped with Audio-Technica's versatile Personal Mix Control, which gives allows volume and mix control of two independent signals on stage, via controls on the M3R stereo body-pack receiver. While up to 16 complete M3 systems may be used simultaneously, any number of M3R stereo receivers can operate on the same frequency with a single M3T stereo transmitter. The M3T Stereo Transmitter is equipped with two XLR/¼" combo input connectors into which users can connect line-level inputs (from a mixing console, for example). The M3T also offers a headphone output that allows you to monitor transmitter input signals directly.

In Depth

- High-fidelity sound with clean, articulate mix allows performers to hear themselves clearly at lower volume
- 1321 selectable UHF channels with automatic frequency scanning
- Up to 16 simultaneous systems per frequency band
- Three receiver modes: Personal Mix, stereo, and mono
- Personal Mix Control allows volume and mix control of two independent signals at the receiver
- LCD information display offers step-through menus for setting preferences
- XLR loop output (true pass-through) connects signal to mixing console, additional IEM system or recording device with no signal degradation
- Adjustable squelch eliminates annoying static
- Pilot tone protects against RF interference when transmitter is turned off
- Multi-level limiter (defeatable) helps protect hearing from sudden peaks
- Portable system is quick to load and set up
- Reduces on-stage audio clutter for better overall mix & less feedback
- Use any number of Stereo Receivers (with individual mixes) on the same frequency
- Audio-Technica earphones with proprietary dynamic drivers offer full frequency response and outstanding isolation
- Personal fit with 3 sizes of rubber eartips plus an ear-conforming foam tip
- Selectable auxiliary input offers connection point for ambient microphone, click track, or other mic- or line-level input

OVERALL SYSTEM SPECIFICATIONS

Operating Frequencies:
- Band E: 790.000 to 822.000 MHz, 1281 frequencies
- Band F: 832.000 to 865.000 MHz, 1282 frequencies
- Band L: 575.000 to 608.000 MHz, 1321 frequencies
- Band M: 614.000 to 647.000 MHz, 1321 frequencies
- *Not all frequency bands available in all areas. Please check with local regulations.

- Minimum Frequency Step: 25 kHz
- Modulation Mode: FM stereo
- Maximum Deviation: ±40 kHz
- Dynamic Range: 90 dB (typical), A-weighted
- Total Harmonic Distortion: <1% at (1 kHz, ±20 kHz Deviation)
- Operating Range: 100 m (300'), typical (Open range environment with no interfering signals.)
- Operating Temperature Range: -5° C (23° F) to +50° C (122° F) (Battery performance may be reduced at very low temperatures.)
- Frequency Response: 60 Hz to 13 kHz (+/- 3 dB)
- Simultaneous Use: 16 channels per band (maximum recommended)

RECEIVER SPECIFICATIONS

- Receiving System: Double conversion superheterodyne
- RF Sensitivity: 20 dBuV (at 60 dB S/N ratio, 50 ohms termination)
- Headphone Output Connector: 3.5 mm TRS stereo phone jack
- Headphone Output Power: 65 mW (at 32 ohms)
- Antenna Input: SMA-type, 50 ohms
- Aux Input Connector: 3.5 mm TRS stereo phone jack
- Batteries: 2 x 1.5V AA (not included)
- Battery Life 8 hours (alkaline) (Depending on battery type and use pattern)
- Dimensions: 70.0 mm (2.76") W x 25.0 mm (0.98") D x 110.0 mm (4.33") H
- Net Weight: 133 g (4.7 oz), without batteries
- Accessories Included: EP3 earphone; flexible antenna

TRANSMITTER SPECIFICATIONS

RF Power Output:
- 10 mW/50 mW (switchable), 50 ohms
- Limited to 10 mW within 863 MHz to 865 MHz
- Following national regulations

- Spurious Emissions: Following federal and national regulations

Input Connections:
- XLRF-type/6.3 mm stereo (1/4") combination connector
- Pin 1 and Sleeve: Ground
- Pin 2 and Tip: Hot
- Pin 3 and Ring: Cold

Maximum Input Level:
- XLRF-type/6.3 mm stereo, (1/4") balanced: +26 dBu
- 6.3 mm (1/4") mono, unbalanced: +26 dBu

Loop Output Connector
- XLRM-type connector
- Pin 1: Ground
- Pin 2: Hot
- Pin 3: Cold

- Power Requirement: 12-18V DC, 600 mA
- Headphone Output Connector: 6.3 mm (1/4") TRS stereo phone jack
- Headphone Output Power: 120 mW at 32 ohms
- Antenna Connector: BNC, 50 ohms
- Dimensions: 210.0 mm (8.30") W x 132.0 mm (5.20") D x 44.0 mm (1.70") H
- Net Weight: 930 g (32.8 oz), without accessories
- Accessories Included: AC adapter (country dependant); rack mount adapters; flexible antenna

Item Number: Audio Technica M3 Dual Band Wireless In-Ear Monitor System [M3M] 43727 1-1

Have a question about the Audio Technica M3 Dual Band Wireless In-Ear Monitor System [M3M]?
Call us toll free at 1-800-878-8882.