|
|
Event 20/20bas
What is it that makes the 20/20bas sound so exceptional? To begin with, they’re based on the 20/20 design, which in itself offers exceptional sound. Reaching the next level required designing an active asymmetrical fourth-order crossover-one with phase response so accurate that the resulting stereo imaging simply must be heard (make that seen) to be believed. Next came the custom 130W amplifier designed specifically for the woofer, followed by the 70W tweeter amp. (In case your math is a little rusty, that’s 200 watts of ultra clean power per side). Finally, independent trim controls for each amplifier were implemented, making it easy to adjust the speakers’ response to your particular monitoring environment.
The biamplified design of the 20/20bas means increased dynamic range. Higher SPL. Improved damping. Greater transient response. Lower intermodulation distortion. Smoother phase response. In short: The 20/20bas delivers exactly what you want in a reference monitor system: superbly clear, detailed, sound. Flat, uncolored, accurate frequency response. Precise imaging. Non-fatiguing to the ears. Fun. That’s right, fun. When was the last time you sat down and really enjoyed listening to a reference monitor?
|
LF Driver: magnetically shielded 8" mineral-filled polypropylene cone with 1-1/2" diameter high-temperature voice coil and damped rubber surround
HF Driver: magnetically shielded 25mm ferrofluid-cooled silk dome
Frequency Response: 35Hz - 20kHz, ±3dB (-2dB @ 38Hz), Ref. 500Hz
Crossover: 2.6kHz, active fourth order
LF Amplifier Power: 130W continuous per side
HF Amplifier Power: 70W continuous per side
Input: Balanced; gold combination XLR - 1/4"; accepts balanced or unbalanced sources
Input Sensitivity: 1.1V input produces full output with Input Level Control at maximum
LF Trim: Continuously variable control; max boost/cut settings produce ±3dB @ 100Hz, ±2dB @ 400Hz
HF Trim: Continuously variable control; max boost/cut settings produces ±3dB above 2.6kHz
Protection: RF interference, output current limiting, over temperature, turn-on/off transient, subsonic filter, resettable mains circuit breaker
Indicators: Combination Power On/Clip LED
Cabinet: 5/8" vinyl-laminated MDF
Dimensions: 10-1/4" W x 14-3/4" H x 11-3/4" D
Weight: 30lbs each
Share
Item Number:
Event 20/20bas
1877
Have a question about the Event 20/20bas?
Call us toll free at 800-878-8882.
|
|
|
View all Event products
|
|
Compact, Ergonomic Workstation in Maple Finish
|
|
|
|
|
|
45 inch Pair of BlackSpeaker Stands
|
|
|
|
Tripod Mic Stand with Telescoping Boom
|
|
|
|
Pro Quality Closed-Back Headphones
|
|
|
|
Professional Stereo Headphones
|
|
|
|
For single monitors, not pairs, call 800-878-8882
|
View Cart
Seen a Lower Price?
