his Whirlwind Medusa Mini Series 12 Channel Snake is a snake cable with a heavy-duty low-profile "mini" steel stagebox at one end and a fanout at the other end. The box features clearly labeled side-exit connectors and fits into many places where a traditional box would be too bulky.
The cabling consists of heavy-duty, flexible Belden CM rated multipair cable. Each pair contains two twisted 24GA 7x32 polyethylene insulated conductors with 100% foil shield and 24GA drain wire.
The fanouts feature genuine Whirlwind connectors. Mic channels are numbered and return connectors are lettered by engraving the metal barrel with large, easy to read graphics.
Snake cables make it possible to combine several balanced (microphone) cables into one smaller diameter multipair cable, making setup and teardown much faster and easier, with less tangling and clutter than would otherwise be the case.
Heavy-duty low-profile powder coated steel stagebox with Whirlwind connectors.
Fanouts with multiple layers of rugged heat shrink at the most critical points.
Fanouts feature Whirlwind connectors with engraved numbers and letters.
Genuine Kellems wire mesh hanger to support the fanout at the board.
Genuine Kellems strain relief and grip with internal cable clamp.
Made in the U.S.A.
Whirlwind Mini 12 50Ft. [MS-12-M-NR-050]
Have a question about the Whirlwind Mini 12 50Ft. [MS-12-M-NR-050]?
Call us toll free at 1-800-878-8882.