"The Pearl" Series of professional electrostatic microphones are designed for both handheld stage performances and studio vocal recording where sound quality and musical character is of the utmost importance. "The Pearl Standard" uses a medium single-diaphragm transducer which provides a modern, detailed vocal sound with airy highs, extended vocal presence and optimized low-end response. "The Grand Pearl" uses a large dual-diaphragm transducer which provides the warm, classical vocal sound usually associated with vintage vocal studio microphones.
These innovative microphones introduce a new physical design with a rear-ported spherical head and a special narrow tapered form reflector to reduce internal resonances and reflections and optimize the unidirectional cardiod polar pattern.
A soft center band around the circumference of the head minimizes shock and handling noise. Rugged microphone construction and internal shockmounts effectively reduce stand rumble, outside infrasonic interference and mechanical shocks.
The internal phantom powered preamplifier’s Class ’A’ fully discrete transformerless circuit provides high output, flat audio response and ultra low distortion and noise. The output connectors are gold plated for best possible signal transfer. "The Pearl" is ready for noise-free handheld or stand use. A flexible stand holder is supplied with microphone. FRR is an optional unique reflection ring accessory which is used as a tool to slightly alter directional characteristics and frequency response by positioning at different points along the microphone body.
In Depth
- Diaphragm’s Diameter (inch/mm): 1"/26 mm - Polar Pattern: Cardioid - Output Impedance: 50 ohms - Rated Impedance: 1000 ohms - Suggested Load Impedance: > 250 ohms - Frequency Range: 20 Hz to 20 kHz - Sensitivity @ 1000 Hz: 20 mV/PA - S/N Ratio CCIR 468-3 Weighted: 75 dB - S/N Ratio DIN/IEC 651 A-weighted: 86 dB-A - Equivalent Noise Level: 8 dB-A - Maximum SPL (<0.5% @ 1000 Hz): 136 dB - Preamplifier’s Dynamic Range: 128 db - Electronics Type: SS - Powering +48V Phantom or PSU: PH - Polarity: pin 2 in phase - Output Transformer: N - Output Connector: XLR-3M - Dimensions (inch/mm): 8.1 x .94" 207 x 204 mm - Weight (lbs/grams): 7 oz/200 g - Included Accessories: Stand holder, wooden box and a manual
Item Number:
Violet Design Grand Pearl
42113 0-0
Have a question about the Violet Design Grand Pearl?
Call us toll free at 1-800-878-8882.
View
Cart
Seen a Lower Price?
