|
|
|
|
Departments
|
Description"The Globe" Series of cardioid studio microphones are designed for world-class recording situations where sound quality and musical character is of utmost importance. "The Globe Standard" is tuned for a classic, wide-spectrum microphone sound ideal for instrument or orchestral applications. "The Globe Vintage" uses a different dual-diaphragm capsule providing a sweet and warm, vintage vocal microphone sound.Both models utilize an isolated spherical head assembly constructed of brass mesh for maximum acoustical transparency. The large dual-diaphragm true electrostatic condenser capsules use the highest quality 6-micron Mylar film. The diaphragms are tensioned and adjusted on precisely- made brass backplates and sputtered with a special-formula gold mixture. This process gives a faster impulse transient response without sound coloration or low-frequency reduction and adds the ability to handle louder sound pressure levels. The internal solid state preamplifier of the microphone is a Class ’A’ fully discrete transformerless circuit, built using only the highest quality components. The circuit is designed to achieve the highest audio standards and provides a flat frequency response, high dynamics, low self-noise, and very low audio distortion of all types. "The Globe" should be used with high quality, regulated 48V phantom power. Rugged microphone construction and 2 internal shockmounts (one for the capsule and one for the electronics) effectively reduce stand rumble, outside infrasonic interference and mechanical shocks. In Depth- Diaphragm’s Diameter (inch/mm): 1"/26 mm- Polar Pattern: Cardioid - Output Impedance: 50 ohms - Rated Impedance: 1000 ohms - Suggested Load Impedance: > 250 ohms - Frequency Range: 20 Hz to 20 kHz - Sensitivity @ 1000 Hz: 19 mV/PA - S/N Ratio CCIR: 468-3 Weighted 76 dB - S/N Ratio DIN/IEC: 651 A-weighted 87 dB-A - Equivalent Noise Level: 7 dB-A - Maximum SPL (<0.5% @ 1000 Hz): 134 dB - Preamplifier’s Dynamic Range: 127 db - Electronics Type: SS - Powering +48V Phantom or PSU: PH - Polarity pin: 2 in phase - Output Transformer: N - Output Connector: XLR-3M - Dimensions (inch/mm): 8.66 x 1.73"/133 x 64 mm - Weight (lbs/grams): 8.8 oz/250 g - Included Accessories: Microphone comes in a solid wooden box, with a GSM shockmount and a manual
Item Number:
Violet Design Globe - Vintage
42103 0-0
|
![]() View all Violet Design products View Additional Images
|
||||||||||||||||||||||||||||||||||||||||||||||||
|
|||||||||||||||
|














