With the TerraTec Producer series 24 Bit/96 kHz PHASE 88 Rack PCI audio system, you’re well-equipped to handle any tasks in your home or project studio, now and in the future.
Eight analog inputs and outputs (balanced 1/4" jacks) give you the room and technology you need, even for larger recording sessions. All inputs can be controlled individually via gain controls on the front panel and feature clipping LEDs to warn of unintended distortion.
Two of the channels can be adapted to microphone use at the press of a button - with XLR sockets and switchable 48 V phantom power. A two-channel digital I/O (S/PDIF) with coaxial (optical on FireWire version) connectors is available for your DAT recorder and other equipment.
A WordClock I/O ensures optimal synchronized connections to external digital equipment, and two independent MIDI interfaces give you 32 MIDI channels to work with. If you ever need more connections than the standard selection of the PHASE 88 rack system, that’s no problem: up to four PCI devices can be cascaded with a single driver, giving you no less than 40 audio channels for simultaneous use. Next to the PCI version the PHASE 88 Rack also is available including a high-speed FireWire- interface. Thanks to its sophisticated board design and proven converters, the system delivers outstanding audio quality: a signal-to-noise ratio of 110 dB (A) speaks for itself.
The PHASE 88 Rack PCI system also is future-proof: if necessary, you can easily replace the rack module’s PCI connection with an optional FireWire (IEEE 1394) interface.
In Depth
- 8 balanced analog 1/4" (TRS) input jacks - 8 balanced analog 1/4" (TRS) output jacks - 8 gain controllers on the front side (20 dB adjustment range) - 8 input signal and clipping LEDs on the front side - 2 XLR/6.3 mm jacks microphone inputs (front side) as alternatives to line inputs 7 and 8 - Inputs 7 and 8 switchable between line/instrument and mic level - 48 V phantom power (switchable) to the microphone inputs - External power supply, 230V/50Hz or 110V/60 Hz to 12V AC - 2 separate MIDI interfaces with 5-pin DIN connector - 24 Bit/96 kHz A/D converters with 100 dB (A) SNR, typically 100 dB (A) @ 48 kHz - 24 Bit/96 kHz D/A converters with 110 dB (A) SNR, typically 109 dB (A) @ 48 kHz - WordClock I/O
FireWire Interface Version: - IEEE-1394 FireWire interface for PC/Mac - 2 high-speed FireWire Ports - Advanced DSP hardware monitor mixer - 10 inputs and 10 outputs in total - Digital input with 2 channels (optical S/PDIF, 24 Bit/ 96 kHz) - Digital output with 2 channels (optical S/PDIF, 24 Bit/ 96 kHz) - None-Audio Mode for transferring AC3 or DTS via Digital Out - Stand-Alone Mode
Software FireWire Version: - WDM driver for Windows - MAC OS X Core-Audio/MIDI support since OS X 10.3.6 - ASIO 2.0 and GSIF (GigaStudio) support for all in- and outputs - ASIO/GSIF/WDM (MME and DirectSound) multi-client mode - "WDM Kernel Streaming" (e.g. for Sonar) - MME- and DirectSound support - Control Panel for Windows XP
System Requirements PC (FireWire-Version): - Pentium III 800 or higher - 128 MB RAM - Windows XP with service Pack 1 (SP1) or higher
System Recommendations PC (PCI- and FireWire-Version): - Intel Pentium4 2 GHz, Celeron 2 GHz or AMD AthlonXP 2000 2 GHz - 512 MB RAM - Windows XP with service pack 1 (SP1) or higher
System Requirements MAC (PCI- and FireWire-Version): - G4 800 MHz - 256 MB RAM - MAC OS X 10.3.6 or higher
System Recommendations MAC (PCI- and FireWire-Version): - G5 1,8 GHz - 512 MB RAM - MAC OS X Panther 10.3.6 or higher
Item Number:
Terratec PHASE 88 Rack FW
41300 1-1
Have a question about the Terratec PHASE 88 Rack FW?
Call us toll free at 1-800-878-8882.
View
Cart
Seen a Lower Price?
