The latest progression in TC's Multi-Award winning mastering technology - the Finalizer 96K - delivers unprecedented levels of clarity, warmth and punch to your mix. With an all new set of advanced features and enhancements, including 96kHz processing, Finalizer 96K truly puts the world of professional mastering within reach of every studio - large or small. Inserted between the stereo output of your mixer or workstation and your master recording media, the Finalizer 96K dramatically rounds out your material, creating that "radio ready" sound - previously unattainable outside a professional mastering house.
Connectors: XLR (AES/EBU), RCA Phono (S/PDIF), Optical (Tos-link, ADAT) Formats: AES/EBU (24 bit), S/PDIF (20 bit), EIAJ CP-340, IEC 958, EIAJ Optical (Tos-link), ADAT Lite pipe Output Dither: HPF/TPDF dither 8-24 bit, mono, stereo, inverted Word Clock Input RCA Phono, 75 ohm, 0.6 to 10 Vpp Sample Rates: 32 kHz, 44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz Processing Delay: 0.2 ms @ 48 kHz, 0.1 ms @ 96 kHz Frequency Response DIO: DC to 23.9 kHz ± 0.01 dB @ 48 kHz DC to 47.9 kHz ± 0.01 dB @ 96 kHz Compressor THD+N -130 dB (0.00003%) @ 10 dB Compression, 20 Hz-20 kHz Input Rate Range 31 kHz to 49 kHz
Connectors: XLR balanced (pin 2 hot) Impedance: 20 Kohm Max. Input Level: +22 dBu (balanced) Min. Input Level (For 0 dBFS): -10 dBu Sensitivity: @ 12 dB headroom: -22 dBu to +10 dBu A to D Conversion: 24 bit (6.144 MHz delta sigma @ 48/96 kHz) A to D Delay: 0.8 ms @ 48 kHz, 0.4 ms @ 96 kHz. Dynamic Range: >103 dB (unweighted, BW=22 kHz), >106 dB(A) THD: -95 dB (0,0018 %) @ 1 kHz, -6 dBFS (FS @ +16 dBu) Frequency Response: 10 Hz to 20 kHz: +0/-0.2 dB @ 48 kHz 10 Hz to 45 kHz: +0/-1 dB @ 96 kHz Crosstalk: <-80 dB, 10 Hz to 20 kHz, typical –100 dB @ 1 kHz
Connectors: XLR balanced (pin 2 hot) Impedance: 100 ohm (active transformer) Max. Output Level: +22 dBu (balanced) Output Range (FS): -10 dBu to +22 dBu D to A Conversion: 24 bit (6.144 MHz delta sigma @ 48/96 kHz) D to A Delay 0.57 ms @ 48 kHz, 0.28 ms @ 96 kHz Dynamic Range: >100 dB (unweighted, BW=22 kHz), >104 dB(A) THD: -82 dB (0.008 %) @ 1 kHz, -6 dBFS (FS @ +16 dBu) Frequency Response: 10 Hz to 20 kHz: +0/-0.5 dB @ 48 kHz 10 Hz to 45 kHz: +0/-3 dB @ 96 kHz Crosstalk: <-60 dB, 10 Hz to 20 kHz, typical –90 dB @ 1 kHz
Complies with: EN 55103-1, EN 55103-2, Class B of FCC rules/part 15, Class B of CISPR 22
Certified to: IEC 65, EN 60065, UL 1419 and CSA E65
Operating Temperature: 32º F to 122º F (0º to 50º) Storage Temperaure: -22º F to 167º F (-30º C to 70º C) Humidity: Max. 90% non-condensing
Connector: PC Card, 68 pin type 1 cards Standards: PCMCIA 2.0, JEIDA 4.0 Card Format: Supports up to 2 MB SRAM
MIDI: In/Out/Thru: 5 pin DIN GPI, Pedal, Fader: 1/4" phone Jack
Finish: Anodized aluminium front Plated and painted steel chasis LCD: 56 x 128 dot graphic LCD-display Dimensions: 19" x 1.75" x 8.2" (483 x 44 x 208 mm) Weight: 5.2 lb. (2.35 kg) Mains Voltage: 100 to 240 VAC, 50 to 60 Hz (auto-select) Power Consumption: <20 W Backup Battery Life: >10 years
Parts and labor: 1 year
The Dynaudio Acoustics nearfield monitor BM5 is a 2-way passive system comprising a 175mm (6.5")woofer and a 28mm (1.25") soft dome tweeter with neodynium magnet, housed in a front ported cabinet
The BM5 is a clean, powerful and accurate monitor where excellent results are achieved with good quality amplifiers.
The BM5 is specifically designed for use in computer-based project studios where the monitor needs to be magnetically shielded. This is achieved by incorporating a high frequency soft dome driver that has a neodymium magnet housed within the aluminium voice coil to prevent its magnetic field from affecting computer monitors. It also has a port in the front baffle making it inherently suitable for mounting within an enclose area – i.e. surround channels for television post production.