The CS1000 Recoding Bundle includes most everything you need to start your next recording session. Included in the bundle is a CS1 mic, an XLR cable, a windscreen, a shock mount, a handy pouch, and the CS1 manual.
CS1 Microphone The Studio Projects CS1 is an externally polarized cardioid pressure gradient transducer microphones with FET impedance converter. The capsule is a 1.06" (27mm) capsule, with a diaphragm thinkness of 6µm. It features four selectable pads, four high pass filters, and four low pass filters for added control in various recording applications and a clear, full response expected from a large capsule microphone design.
Versatility is key in the recording arena, and the Studio Projects CS1 is well equiped to handle any recording application. It is designed to deliver the finest quality vocal and instrumental recordings and will serve to enhance any professional or project studio.
As a result of uncompromising dedication and advanced production capabilities, Studio Projects will continue to broaden the range of quality pro audio microphones & electronics for today's recording environment.
Close miking of instruments with high sound pressure levels
Announcer's mic for broadcasting/dubbing
Home recording and project studios
Spot mic for: wind instruments, strings, percussion and guitar amps
XY - Coincident Cardioids
Stereosonic Technique (Blumlein)
Type: Pressure gradient transducer microphone
Polar pattern: Cardioid
Frequency response: 20~20000Hz
Output impedance: <200 Ohm
Load impedance: >1000 Ohm
Maximum SPL: 134 dB SPL for 1% THD @1000Hz (0dB SPL=0.00002Pa).
Noise: 10 dB-A (A-weighted per IEC268-15)
S/N: 84 dB-A
Pads: -5dB, -10dB, -15dB, and -20dB selectable
Low Pass: 15kHz, 7kHz, 5kHz, and 3kHz 6dB/Octave
High Pass: 50hZ, 75hZ, 150Hz, and 300hZ 6dB/Octave