Space saving, compact drum and brass microphone. Ideal for low visibility, close miking techniques. The frequency response and cardioid pick-up pattern are optimised for drum sets and other percussion instrument miking, whilst also producing exceptional results on all forms of brass and woodwind. An integral stand mount screws directly onto mic stands and included clip attaches mic to rim of drum.
Very high sound pressure level handling, in excess of 160dB, is combined with a balanced, clear, low distortion signal similar to a high-end studio condensor microphone. Lightweight voice coil provides extended high frequency and rapid transient response. A tough reinforced glass fibre body takes the knocks and shocks and suppresses impact noise.
Frequency response 40Hz...18kHz Transducer principle Pressure gradient receiver Pick-up pattern Cardioid Front-to-back-rejection at 1kHz at 120 degrees >25dB Sensitivity (free field, no load) 1kHz 1.8mV/Pa = -55dB (0dB=1V/Pa) 1.8mV/Pa = -75dB (0dB=1V/mbar) (USA) Nominal impedance at 1kHz 350 ohms Min. terminating impedance 1000 ohms Sensitivity to magnetic field at 50Hz 1 µV/µT Weight 60 g Dimensions Ø 33 x 59mm Delivered with pouch and drum clip