The RØDE VideoMic Pro raises the bar set by the original RØDE VideoMic, by combining broadcast quality audio with an ultra compact and lightweight ergonomic design.
Incorporating new features specific to high end video, the VMP also evolves many of the features that have made the VideoMic so successful. Noise transference has been significantly reduced using both a revised, more elegant shock mounting system and a lightweight premium cable.
In Depth
Broadcast recording quality condenser microphone
Compact design (only 150mm/6" length)
Ultra lightweight (only 85g/3oz)
9V battery powered, with up to 70 hours battery life (alkaline)
Integrated shock mounting
Integrated foam windshield
3.5mm stereo mini-jack output (dual mono)
Two step High Pass Filter (flat, 80Hz)
Three position level control (-10dB, 0, +20dB)
Camera shoe mount with 3/8" thread for easy boompole mounting
Ten year warranty: following online registration
Power: 9V alkaline battery (Current 7.8mA)
Acoustic Principle: Line Gradient
Directional Pattern: Super-Cardioid
Frequency range: 40Hz-20kHz, selectable HPF @
80Hz/12dB/octave
Output impedance: 200Ω
Signal noise ratio: 74 dB SPL (A - weighted per IEC651)
Equivalent noise: 20 dB SPL (A - weighted per IEC651)
Maximum SPL: 134dB SPL (@ 1kHz, 1% THD into 1KΩ load)
Maximum output voltage: +6.9dBu (@ 1% THD into 1kΩ)
Sensitivity: -38 dB re 1 Volt/Pascal (15 mV @ 94 dB SPL) +/- 2 dB @ 1kHz
Weight: 85g/3ozgm
Dimensions: 95mm/3.74"mmH x 43mm/1.69"mmW x 150mm/6"mmD
View
Cart
Seen a Lower Price?
View Manual
