The Rode D-PowerPlug is effectively a ‘Turbo Charger’ for Dynamic microphones! Featuring an instrumentation grade pre-amplifier circuit, D-PowerPlug will turn any standard dynamic microphone into a high level electronically balanced output device. Using conventional microphones with long multicore cables results in a dramatic loss of signal strength, and of course sound quality due to cable resistance and capacitance. Powered by standard P48V, D-PowerPlug can drive cables in excess of 100 m with negligible loss of signal quality or power.
Instrumentation grade pre-amplifier Balanced input and balanced output Can be used with long cable runs with minimum losses P48V phantom powered
Gain +20 dB Input Level (nominal) 1 mV Output Level (nominal) 10 mV Frequency Response 20 Hz ~ 20 kHz (-3 dB) Input impedance 100 kO balanced per arm Output Impedence 100 O balanced Noise -116 dB A-Wt RTI Maximum Input 0.8 Vp-p Maximum Output +11.4 dBu @ 1% THD (8 Vp-p) Input Connector XLR 3 PIN Female Output Connector XLR 3 PIN Male Pin Assignment Pin 1 GND, Pin 2 Signal(+), Pin 3 Signal(-) Current Consumption 3 mA @ 48V Weight approx. 73.8 grm Dimensions 94 mm x 19 mm (L x W)
Have a question about the Rode D-PowerPlug ?
Call us toll free at 1-800-878-8882.