Save 12% OFF Your Next Purchase!
Site Map  |  Contact  |  My Account  |  Home 1-800-878-8882 Mon-Fri 9:30AM - 6:00PM, Sat 10AM - 5PM Shipping  |  Policies  |  Security
view cartView Cart  |  Items: 0  |  Subtotal: $0.00  |  Check Out

Departments

RME Audio HDSP 9652

Zero Latency - 3 x ADAT optical I/O

Product Code: 8950

Retail Price: $799.00

SALE PRICE!

$729.00

BUY TODAY AND SAVE $70.00 (9% from Retail)


Order the RME Audio HDSP 9652 Now!

Ships free on most orders over $99.95
Click for Details

Click Here for Shipping Options

8thstreet Reward$

Seen a Lower Price?
Call 1-800-878-8882
or Click Here to let us know now!


Description
HDSP 9652 is the long-awaited successor of the well-known PCI card Project Hammerfall (DIGI9652). Like the original Hammerfall, HDSP 9652 offers 3 x ADAT optical I/O, ADAT-Sync In, SPDIF I/O and word clock I/O. On top, there are 2 MIDI I/Os and TotalMix, a DSP-based real-time mixer/router.
The HDSP 9652’s Secure BIOS Technology allows to perform hardware updates via software/driver without any risk. And thanks to its unique ’Zero CPU Load’ technology Hammerfall DSP guarantees highest performance and lowest latency on both notebooks and desktops!
Hammerfall also allows to connect Analog Expansion Boards (AEB). Two internal ADAT inputs and two internal ADAT outputs allow you to realize up to 16 analog inputs and 16 analog outputs directly inside the computer.
In Depth
3 x ADAT digital I/O, based on RME’s reliable Bitclock PLL

1 x SPDIF digital I/O, based on RME’s reliable DIGI96 technology

1 x Breakout cable for coaxial SPDIF operation

1 x Word clock I/O (BNC) on included expansion board

1 x ADAT Sync In (9-pin D-type) for sample accurate transfers

2 x MIDI I/O, 32 channels high-speed MIDI via breakout cable

HDSP Meter Bridge: freely scalable level meters, peak- and RMS calculation directly in hardware

TotalMix: 1456 channel mixer with 40 bit internal resolution

S/MUX poured in hardware: 12 channels 96 kHz/24 bit for record and playback on ADAT optical

...and numerous other features found already in the Hammerfall series. And all this for an unbeatable price!
The Hammerfall® DSP System comes with drivers for Windows 98/ME (MME with multi-client operation, ASIO 2.0, GSIF), Windows 2000/XP (full multi-client operation of MME, GSIF and ASIO 2.0) and MacOS (ASIO 2.0).


Supported sample rates: 32 kHz, 44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz, variable
8 buffer sizes/latencies available: 1.5 ms, 3 ms, 6 ms, 12 ms, 23 ms, 46 ms, 93 ms, 186 ms
ASIO zero CPU load technology: 0 (zero!)% CPU load when using ALL 52 channels!
All settings changeable in realtime
Clock modes slave and master
Automatic and intelligent master/slave clock control
Enhanced Mixed mode: All inputs and outputs simultaneously operational
Unsurpassed Bitclock PLL (audio synchronization) in ADAT® mode
Enhanced Zero Latency Monitoring for latency-free submixes and perfect ASIO Direct Monitoring
Comes with DIGICheck: the ultimate measurement, analysis and test tool
Input 3 x optical (TOSLINK), 1 x coaxial (Cinch), 2 x MIDI, word clock (BNC)
Input format SPDIF, AES/EBU (Consumer, Professional), ADAT® optical
Output 3 x optical (TOSLINK), coaxial (Cinch), 2 x MIDI, word clock (BNC)
Format output SPDIF, AES/EBU (Consumer/Professional), ADAT® optical


UNIQUE TECHNOLOGIES IN HDSP9652

AutoSync: Intelligent clock control according to operational mode and present/desired sample rate.
Intelligent clock control according to operational mode and present/desired sample rate.

Bitclock PLL
The most reliable receiver circuit for ADAT optical signal.

Dynamic Bus Utilization
Scalable computer load according to the current usage.

Enhanced ZLM®
Monitoring of the input signal, independent from clock mode and sample rate.

DIGICheck DSP
Professional status and level display at lowest CPU load.

Intelligent Clock Control
Measurement and display of all incoming and used clocks.

Latency Fast Change
Change latency on-the-fly under ASIO, without manual reset or re-boot.

Secure BIOS Technology
Automatic BIOS replacement when flash process fails.

SyncAlign®
Surveillance and sample accurate synchronization of all channels.

SyncCheck®
Comparison and display of all input clock status.

TotalMix
Mixes all inputs and all outputs on all outputs. Several independent submixes possible.

Zero Latency Monitoring (ZLM®): Automatic monitoring of the input signal with zero latency.

Item Number: RME Audio HDSP 9652    8950 0-0
Have a question about the RME Audio HDSP 9652?
Call us toll free at 1-800-878-8882.
View all RME Audio products
View all RME Audio products


RME Audio HDSP 9652


Check Out These Products
RME Audio Fireface 400
RME Audio Fireface 400 $1,299.00 Buy
36 channel, 24-bit, 192 Bus-powered FireWire Audio Interface
RME Audio HDSP Hammerfall Cardbus
RME Audio HDSP Hammerfall Cardbus $429.00 Buy
Laptop Digital Audio PCMCIA Type II Card
Novation 25SL Mk II
Novation 25SL Mk II $399.99 Buy
25-key USB MIDI Controller
Audio Technica ATH-M50x Black
Audio Technica ATH-M50x Black $169.00 Buy
Professional Monitor Headphones
Hosa CRA-805
Hosa CRA-805 $34.95 Buy
5 Meter Unbalanced Cable Snake, RCA to RCA
Hosa OPM-310 - 10 Ft.
Hosa OPM-310 - 10 Ft. $18.99 Buy
Pro Fiber Optic Cable, Toslink to Toslink
Hosa DRA-503 - 3 Meter
Hosa DRA-503 - 3 Meter $14.95 Buy
S/PDIF Coax Cable, RCA to RCA

© Copyright 1996-2014 Eighth Street Music Inc. All Rights Reserved. Prices and availability of products are subject to change without notice. Product descriptions, pictures, are provided with intent of accuracy; however, 8th Street is not liable for errors, omissions, or misrepresentations. Please call 1-800-878-8882 with any questions. Privacy Policy.

Contact  |  E-mail  |  My Account Shipping  |  Order Tracking