Peavey MP400 w/2 PR 12 Speakers

MP400 Powered mixer with 2 PR 12 Speakers & 2 Fifty Ft Speaker Cables

Product Code: 20485

We're sorry, this product is no longer available.

Description

Peavey MP400
The MP400 is an 80-watt, 4-channel powered mixer with high and low Z inputs (15V phantom power) on each channel. Also provided on each channel is a volume, tone and effect level control. The MP 400 has a spring reverb, an effect out is provided for connection to external effects, and the main output section has three-band EQ. The pre-amplifier main output can be used for recording and an auxiliary input is provided for tape playback or connection to the external effects as a return. Featuring the essential requirements for a sound reinforcement mixer, the MP 400 is a breeze to operate and easy to own.

Features

Four total input channels
Reverb control on each channel
Contour high frequency equalizer on each channel
1/4" and XLR inputs on each input channel
1/4" Main Output
1/4" Aux/Reverb Output
1/4" Aux Input
1/4" Remote Switch for reverb defeat
Master Three-band Equalizer
Master Level and Reverb controls
80 W power amp

Specifications

CHANNEL
Equivalent Input Noise: -116 dBV @ 40 dB Max Gain
Frequency Response (To Speaker Outputs): +/-3 dB 20 Hz to 20 kHz
Distortion: @ (1 kHz): Less than .009%
Input Impedance:
Low Z Balanced: 2K ohms
1/4" Mic Input: 22K ohms
CHANNEL EQ
Contour EQ:
+/-15 dB @ 10 kHz Minimum
Center Detent flat +/-2 dB
Nominal Channel Gain:
Line = 0 dB
Low Z = 30 dB
Maximum Channel Gain:
Low Z = 50 dB
Line = 19 dB
Nominal Input Level:
Low Z = -30 dB
Line = 0 dB
Minimum Input Level:
Low Z = -50 dB
Line = -19 dB
Maximum Input Level:
Low Z =-11 dB
Line = +28 dB
Phantom Power: +15 VDC
MASTER
Gain: Main: = 10 dB (variable)
High EQ:
+/- 15 dB @ 12 kHz Minimum
Center Detent flat +/-2 dB
Mid EQ:
+/- 15 dB @ 1 kHz Minimum
Center Detent flat +/-2 dB
Low EQ:
+/- 15 dB @ 60 HZ Minimum
Center Detent flat +/-2 dB
Maximum Output Level:
Main: = + 18 dBV (8.0 V RMS)
Effects: = + 18 dBV (8.0 V RMS)
Nominal Headroom:
Main: = 18 dB
Effects: = 18 dB
Output Impedance:
Main: = 100 ohms
Effects: = 100 ohms
Output Noise:
Residual: -95 (Master Level Down)
Bus: -93 (Master Nominal, All Channel Level Full CCW, Reverb Level Down)
Nominal: -78 (All Controls Nominal, Low Z Input Terminated 150 Ohms)
Signal to noise ratio:
Microphone input to speaker output: >80 dB
Frequency Response: 20 Hz to 20 kHz
OTHER
SYSTEM DYNAMIC RANGE: 95 dB
POWER AMP SECTION:
Frequency Response: +0, -3 dB, 30 Hz to 28 kHz @ Rated Power
RATED POWER AND LOAD:
80 W RMS into 4 ohms
55 W RMS into 8 ohms
THD less than .5% Mic input to speaker output 1 kHz at rated power. Speaker system Impedance: 4 ohms minimum.
Power Requirements: 150W @ 100V, 120V, 230 VAC 50/60 Hz.

In Depth

Peavey PR™ 12
The Pro-Lite series delivers superior sound quality by utilizing advanced materials, like its lightweight, road-worthy molded polypropylene exterior. A 2 inch voice coil provides improved power andling and a 1.4 inch 14XT™ titanium diaphragm with 1 inch exit allows for crisp, clear highs, while tweeter protection is crucial for those moments when too loud isn’t loud enough.

2-way sound reinforcement enclosure

250/500 Watt power handling

One 12 inch premium, 2 inch voice coil woofer

14XT™ compression driver with 1.4 inch titanium diaphragm 1 inch exit

90 x 40 degree constant directivity horn

Tweeter protection

Heavy-duty crossover

Lightweight molded polypropylene enclosure

Molded-in pole mounts system

Heavy-duty metal grille

PACKED WEIGHT 36
PACKED WIDTH 20.75
PACKED DEPTH 16.50
PACKED HEIGHT 24.50

Item Number: Peavey MP400 w/2 PR 12 Speakers 20485 0-0