With 1600 watts (800W + 800W) of system power, the PPM1008 is in a class of its ownfully capable of powering a huge system (try a couple S215s AND a pair of C300s!). Mackie custom designed the PPM1008 with Class-D amps, which are cool-running and boast maximum efficiency, keeping your sound pumping until they start kicking people out. Mackie also included their proven Fast Recovery circuitry, eliminating the risk of pesky amp latching. The result is a distortion free mix even when pushing peak levels. The built-in limiter can go toe-to-toe with the most popular outboard stereo limiters used in live sound today, protecting your speakers from damage. The limiter’s attack and release times are specifically selected to address full-bandwidth music and will not muddy things up by adding any unwanted pumping. PPM mixers are surprisingly lightweight, but tremendously powerful. You can push the PPM1008 to its maximum output, distortion free!
The all-new RMFX+ (Running Man FX) 32-bit effects processor brings gig ready, useable effects to your mixes. Why scroll through hundreds of bizarre effects, like ghost ambience? Yeah, like anyone even knows what that means. Or how about winners like delay+phaser2, which you’ll never use in a million years. Those other mixers will leave your fingers raw from all the scrolling you have to do. The RMFX+ processor features 24 solid FX that are known for their utility and usability. Small, medium and large room reverbs with the choice of a warm or bright characteristic put your mix in the right space. Simple, rich choruses and an array of practical delays enable you to create professional mixes without requiring a two-hour sound check. Also, the RMFX+ is the first onboard processor to feature a user tap function. So if you want to use a delay, but Mackie’s preset delay time doesn’t work, you can tap it in instantly! Basically, they delivered a full rack of gear at your fingertips that is easy to master, allowing you to look really and sound really good at your next gig. Really, really good.
The PPM1008 is fully armored inside a solid steel chassis, helping to protect the electronics from any potential environmental hazard (Think beer.) Extremely durable polycarbonate ABS end caps will protect the PPM1008 from years of abuse caused by tossing it in and out of the truck or falling off the stool at rehearsal. Each PPM1008 features rounded front with recessed controls, so if it rolls on its face in the van or gets kicked over at the show, you can be sure that it will emerge damage-free. Two metal side handles allow you to easily pick it up and get going. It’s ultra-light so you won’t need both hands!
- Full-featured 8-channel, 1600W, ultra-light Professional Powered Mixer with onboard 32-bit digital RMFX+™ processor - 800W + 800W Mackie designed Class-D, Fast Recovery™ power amplifiers - 32-bit RMFX+™ processor featuring 24 “Gig Ready”, useable reverbs, choruses, and tap delay for live applications - 8 premium Mackie mic preamps with 48V phantom power and TRS inserts (ch 1-6) - New Dedicated In-line Compression provides increased presence and punch for vocals and instruments - 2 stereo inputs with dual RCA and dual 1/4-inch line inputs for flexible connectivity - Mackie’s 3-Band Active channel EQ with a Mid sweep (100Hz-8kHz) on mono channels - 2 built-in DI boxes for direct instrument connections - Separate Monitor and FX auxiliary sends - Dual 9-Band graphic EQ on the Mains and Monitor outputs for tuning rooms and monitor mixes - 3-Mode Amplifier for ultra-flexible routing, switchable as Mains Stereo L/R, Mono Mains/Monitor 1, or Mon 1 & Mon 2 - Precision Passive EQ for enhanced clarity and LF response with Mackie passive loudspeakers - Rugged metal handles built into the sides of the mixer case for easy transport from gig to gig - Built like a tank and armored in poly carbonate ABS, the PPM1008 features classic Mackie rounded front chassis design. So if the PPM rolls on its face during transport the controls are recessed and protected. - Ultra-Lightweight and portable (20 lbs/ 9 kg)