This is your first choice for mono voice reinforcement at smaller conferences and presentations. It's also an excellent setup for covering specific zones. Its linear response and directional dispersion pattern ensure excellent speech intelligibility.
E435 The HK Audio E435 Element Mid/High Unit PA Speaker is loaded with four 3.5 inch high-performance speakers developed specifically for Elements. These four vertically arrayed speakers achieve a very even pattern of throw, with the volume, frequency spectrum, and audio image remaining uniform throughout the audience area. One column may comprise up to four mid/ high units, which are quickly and reliably connected via E-Connect.
EA600 Housed in an enclosure that shares the same design as the mid/ high unit, the HK Audio EA600 Element Power Amplifier delivers 600 watts at 4 ohms. It can drive up to two passive E 110 Sub subwoofers or one passive subwoofer with up to two E 435 mid/ high units or one column with up to four mid/ high units. The power amp module is ventilated from the front. A rotary selector lets you choose a special EQ setting to match the number of connected E 435s and optimize the frequency response for a column of that height.
EP1 The EP 1/ EP 2 E-Connect pole lets you place one or even several mid/ high units on the EF 45 base or EA 600 amp. The pole is freely adjustable up to a length of 1.60 meters (EP 2= 0,605 meters), so you can set the height as you see fit by engaging its twist-lock fastener. No speaker cords are necessary thanks to the integrated bus.
EF45 The HK Audio EF45 Element base mount is a handy addition to your HK Audio rig! This EF45 mount accommodates the HK Audio pole, power amp module, and mid/high unit. This EF45 element base is a durable system mount that provides two parallel NL4 ports. When you need a stable system base, count on the HK Audio EF45 element base mount.
The NL4 ports on both sides serve to patch the audio signal in and route it through to further speakers. If you place an amp on its feet, you can connect another passive subwoofer to its Speaker Out port. The NL4 ports on the side panels also let you use a speaker cord to connect mid/ high units mounted on further poles.