Electro Voice N/D-767a w/ 20ft Whirlwind mic cable

Neo-dymium, Top of the line dynamic hand-held microphone

Product Code: 1632

We're sorry, this product is no longer available.

Description

*Includes 20’ Whirlwind Low Z Mic Cable

The N/D767a presents optimal performance in a live sound environment.The 767a vocal microphone utilizes EV’s new VOB™(vocally optimized bass) technology to provide the performer with reduced low-end distortion and eliminates the muddiness found in other microphones. Combined with EV’s industry first neodymium based magnet structure, the new N/D767a offers the power and clarity to “cut through the mix.”
• VOB™ technology provides tailored bass response for controlled “proximity effect” and exceptional vocal clarity
• Supercardioid pattern for superior feedback rejection and acoustic isolation.
• Multistage shock mount for unmatched
low-handling noise.
• Neodymium based magnet structure provides greater sensitivity and signal-to-noise ratio.
• Warm Grip™ handle for more comfortable feel.
Operation
The low frequency response of the N/D767a microphone varies with the distance from the sound source. Known as “proximity effect,” maximum bass response is produced in “close-up” use with the microphone 1/4 inch from the sound source. Normal bass response is experienced with working distances greater than 24 inches.Working close to the microphone will produce a more robust sound. Close up positioning of the microphone will also reduce the potential for feedback from the sound reinforcement system.When close-talked, the bass-boost provides an increase in overall microphone output level. The mixer gain may be proportionately reduced, resulting in a reduction of the system’s sensitivity to feedback caused by sound entering the microphone from the loudspeakers.

In Depth

Element Dynamic N/DYM® magnet structure
Frequency Response
Close Response 35 Hz to 22 kHz
Far Response 70 Hz to 22 kHz
Polar Pattern Supercardioid
Impedance Low-Z balanced (300 Ohms)
Sensitivity
Open Circuit Voltage 3.1 mV/Pascal @ 1.0 kHz
Power Level (0 dB=1mW/pascal) -51 dB
Microphone Connector 3-pin, XLR-type
Polarity Pin 2 positive, referenced to pin 3 with positive pressure on diaphragm
Finish Non-reflecting black
Materials
Memraflex ™ grille screen
Warm-Grip™ handle
Dimensions
Length @ 7.1 in. (181 mm)
Diameter @ 21 In. (52 mm)
Shank @ 0.80 in. (20 mm)
Weight
Net @ 9.2 oz (260 g)
Shipping @ 18.9 oz (535 g)
Accessories included
Stand adapter (black)
Soft zippered “gig” bag

Item Number: Electro Voice N/D-767a w/ 20ft Whirlwind mic cable 1632 0-0