With two channels and 120 punishing watts of all-tube power, the Egnater Vengeance guitar amp head is sure to breath new life into your playing, your creativity, and your music. Channel 1 takes you from lush, organic cleans to heavy, crunchy rhythm while Channel 2 goes from serious classic-rock overdrive to extreme modern metal. Egnater's signature Tight & Bright voicing switches and a mid cut/boost switch on each channel further customize your tone. Independent reverb on each channel has an innovative "spillover" design, allowing natural decay when switching channels.
The footswitchable secondary master volume pushes solos to harrowing heights. A balanced speaker-emulated output goes directly to the board live or in the studio. The included 6-button footswitch connects via a standard XLR cable, which is easily replaceable. Standard 1/4" jacks for external control of the switching functions provide increased flexibility.
120W all-tube head
6 -12AX7 preamp tubes
4 - 6L6 power tubes
Selectable full/half power switch (120W/60W)
Two independent channels, each with Volume, Gain, and 3-band EQ
Tight/Bright voicing switches per channel
Mid Cut/Boost voicing switch per channel
High/Low Gain switch per channel
Independent reverb controls per channel with unique spillover design
Master Presensce and Density controls
Main and secondary Master Volumes
Includes six-button footswitch for channel select, Channel1 mids, Channel 2 mids, Effects Loop, Reverb, and 2nd Master Volume
Assign the effects loop and 2nd Master to Channel 1, Channel 2, or both
Additional 1/4" jacks for external control of switching functions
Simple bias adjust with external test points
Balanced XLR cabinet-voiced line/recording output
Buffered effects loop with send/return levels
100V/117V/230V voltage selector
Egnater Vengeance Head [VENGEANCE]
Have a question about the Egnater Vengeance Head [VENGEANCE]?
Call us toll free at 1-800-878-8882.