Carl Martin Contour & Boost is especially designed to boost up, and change the sound (contour) of electric guitar/bass.
The Contour & Boost circuitry is of phase linear design, using high quality components. This ensures sonic clarity and midrange emphasis which is so important for electric guitar.
The Contour & Boost is designed as a High Pass (low cut) and Low Pass (high cut) filter, with a fixed X-over frequency at 440Hz. The High Pass filter operates from 65Hz to 440Hz, and the Low Pass filter from 440Hz to 8kHz. Both filters are individually sweepable, with a boost range of up to 12dB. With these two filters it is possible to change the sound (contour) in any way your creativity allows you.
The Carl Martin Contour & Boost has a built in, regulated (+-12V) power supply which enables us to design circuitry of the highest quality with maximum headroom.
Please note that when using this unit with other effect devices, always place the Contour & Boost after any distortion units, otherwise the distortion unit will limit what you can achieve with the Contour & Boost.
- Power: 100 or 115 or 230 VAC 50-60Hz - Power consumption: 2.4 Watts - S/N ratio: 80 dB - Input impedance: 1M Ohm - Output impedance: 100 Ohm - THD distortion: 0.01% at 0 dB - Frequency range: 65 Hz - 8 kHz - High pass range: 65 Hz to 440 Hz - Low pass range: 440 Hz to 8kHz - Boost range: +12 dB - Dimension: 120(D) 95(W) 77(H) - Weight: 0.625Kg
Carl Martin Contour n Boost
Have a question about the Carl Martin Contour n Boost?
Call us toll free at 1-800-878-8882.