The VX-10 is a true condenser microphone designed to set new performance standards in the areas of live sound and broadcast applications.
With a smooth uniform response over a frequency range of 40 – 20k Hz, the VX-10 is highly sensitive to transient response and will reproduce vocals and speech with exceptional detail and realism. The VX-10 will handle close miking with minimal proximity effect and will not lose signal if the user is slightly off-axis from the front of the microphone. A cardioid pattern provides excellent gain before feedback and, even with it’s extended low end response, the VX-10 offers sonic clarity without "boominess" in the lower mids— usually difficult to attain with live vocals.
The VX-10 operates on phantom power of 48 – 52 volts and will achieve optimum results with a high quality mic preamp. Low noise electronic circuitry, low impedance, and balanced output allow interference-free performance even with long cable runs.
In Depth
Applications Lead vocals Background vocals Speech Live performance and live broadcasts Excellent for use with in-ear monitors On air announce microphone Studio vocals Acoustic instruments ( flute, strings, guitar, piano )
Supplied Accessories CVX10 - Foam lined wooden carrying case MC1 - High quality nylon mic clip adjustable through 180 degrees with a standard 5/8 inch –27 thread. (Note: metal adapter also sup-plied to accommodate European standard threads). P1 - Cordura carrying pouch.
Optional Accessories GR357 - Rounded top steel mesh grill ball with integral pop filter WS-10 - External acoustic foam windscreen APS-2 - 2 channel phantom power supply
S P E C I F I C A T I O N S Transducer Type Condenser Frequency Response 40 Hz - 20 kHz Polar Pattern Cardioid Output Impedance 250 Ohms Open Circuit Sensitivity 23 mV (ref 1k @ 1 Pascal) Equivalent Noise Level 19 dB (A weighted) Signal to Noise Ratio 73 dB (ref 1k @ 1 Pascal) Power Requirements 48 - 52v phantom Maximum SPL 138 dB Cable/Connector 3 pin gold plated male XLR connector Polarity Positive voltage on pin 2 relative to pin 3 of output XLR connector Housing Die cast zinc body with brass capsule housing Weight 11.24 oz / 318.6 grams Finish Black E-coat
Item Number:
Audix VX10 [VX10]
10416 0-0
Have a question about the Audix VX10 [VX10]?
Call us toll free at 1-800-878-8882.
View
Cart
Seen a Lower Price?
