The length (14.53") of the AT8035 Line + Gradient Condenser Microphone is well-suited for ENG, outdoor recording and other specialized uses. The microphone is designed for video production and broadcast (ENG/EFP) audio acquisition. Suited for both boom & handheld use, it provides the narrow acceptance angle desirable for long-distance sound pickup, featuring excellent sound rejection from the sides and rear of mic and switchable low-frequency roll-off. It operates on battery or phantom power.
In Depth
- Designed for video production and broadcast (ENG/EFP) audio acquisition - Length is well-suited for ENG, outdoor recording and other specialized uses - Provides the narrow acceptance angle desirable for long-distance sound pickup - Excellent sound rejection from the sides and rear of mic - Switchable low-frequency roll-off - Operates on battery or phantom power - RoHS compliant—free from all substances specified in the EU directive on hazardous substances
- Element: Fixed-charge back plate, permanently polarized condenser - Polar Pattern: Line + Gradient - Frequency Response: 40-20,000 Hz - Low Frequency Roll-Off: 80Hz, 12dB/octave - Open Circuit Sensitivity: Phantom: 250 ohms; Battery: 300 ohms - Maximum Input Sound Level: Phantom: 132dB SPL, 1kHz at 1% THD; Battery: 120dB SPL, 1kHz at 1% THD - Dynamic Range (typical): Phantom: 110dB, 1kHz at Max SPL; Battery: 98dB, 1kHz at Max SPL - Signal-to-Noise Ratio: 72dB, 1kHz at 1Pa - Phantom Power Requirements: 11-52V DC, 2 mA typical - Battery Type: 1.5V AA/UM3 - Battery Current/Life: 0.4 mA/1200 hours typical (alkaline) - Switch: Flat, roll-off - Weight: 6 oz - Dimensions: 14.53" long, 0.83" diameter - Output Connector: Integral 3-pin XLRM-type - Accessories Furnished: AT8405a stand clamp for 5/8"-27 threaded stands; 5/8"-27 to 3/8"-16 threaded adapter, AT8132 windscreen; battery; protective carrying case
View
Cart
Seen a Lower Price?
